The Apollo 4020P Multiport high-throughput asynchronous controller supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux kernal 2.4. 

• Four ports from one PCI Bus slot
• Asynchronous data transfer rates up to 230.4 kbps, full duplex, simultaneously on all ports
• Supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux (kernel build 2.4.17 and above)
• Interface options include:
  • RS-232
  • RS-422 or RS-485 with DB-25 connectors via an external breakout box
• Full modem support on al ports
• 128 Byte FIFO data buffer on each port for optimum throughput and performance
• On-board hardware (out of band) and software (in band) flow control on all ports assures data integrity

The Apollo 4022P Multiport serial communications controller enables up to four serial devices to be interfaced from one PCI Bus slot. It supports asynchronous data transfer rates up to 230.4 kbps, full duplex, simultaneously on all ports.

The Apollo 4022P Multiport high-throughput asynchronous controller supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux kernel 2.4.

• Four ports from one PCI Bus slot
• PCI 2.2 compliant
• Asynchronous data transfer rates up to 230.4 kbps, full duplex, simultaneously on all ports
• Supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux (kernel build 2.4.17 and above)
• Interface options include:
  • RS-232
  • RS-422 or RS-485 with DB-25 connectors via an external breakout box
• Full modem support on al ports
• 128 Byte FIFO data buffer on each port for optimum throughput and performance
• On-board hardware (out of band) and software (in band) flow control on all ports assures data integrity

The Aries Multiport high-throughput asynchronous controllers supports SPARC® Solaris®, Rev. 8, 9, and 10; Solaris x86, Rev. 2.8 and 8; and Linux kernel 2.4

• 16 ports from one PCI Bus slot
• Asynchronous data transfer rates of 115.2 kbps, full duplex, simultaneously on all ports
• Supports SPARC® Solaris®, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux kernal 2.4.
• Interface options include:
• • RS-232 with DB-25 or RJ-45 connectors
  • RS-422 or RS-485 with DB-25 connectors via an external breakout box
• Data buffer on each port for increased throughput and performance
• On-board hardware (out of band) and software (in band) flow control on all ports assures data integrity
• Compatible with Aurora’s 1U Rack-Mount RJ-45 Interconnect Module (RIM) in 16, 32, and 48 port counts

The Aries Multiport high-throughput asynchronous controllers supports SPARC® Solaris®, Rev. 8, 9, and 10; Solaris x86, Rev. 2.8 and 10; and Linux kernel 2.4.

Eight ports from one PCI Bus slot

• Asynchronous data transfer rates of 115.2 kbps, full duplex, simultaneously on all ports
• Supports SPARC® Solaris®, Rev. 8, 9, and 10; Solaris x86, Rev. 2.8 and 10; and Linux kernel 2.4.
• Interface options include:
• • RS-232 with DB-25 or RJ-45 connectors
  • RS-422 or RS-485 with DB-25 connectors via an external breakout box
• Data buffer on each port for increased throughput and performance
• On-board hardware (out of band) and software (in band) flow control on all ports assures data integrity

ControlTower 3.0 is a reliable time and cost-saving solution for monitoring and controlling multiple Sun Microsystems' and other UNIX servers, as well as many serial line console devices. From a central console or via remote access, ControlTower 3.0 enables Sun SPARC servers to function as common consoles for an unlimited number of managed systems.

ControlTower 3.0 features breakthrough security options, error handling, and logging features for greater customization and flexibility.

• Local or remote console access via serial connections to headless servers and other Unix devices
• Remote access via TCP/IP or modem connection to the host
• Hardware certified against spurious break signals
• Up to 128 ports per host
• Complete console logs
• Secure, encrypted access to remote systems using up to 128-bit AES encryption
• System access can be restricted by IP address, password, or Unix account
• Many levels of filtering and access logging
• SSH compatible

ControlTower 3.L provides a reliable time and cost saving solution for monitoring and controlling multiple devices through an RJ-45/DB-25 interface from a central location or by remote access. It enables a single Linux-based system to function as a common console (monitor and keyboard) for managed devices. ControlTower 3.L is integrated into the distributions of Mandriva, RedHat, and SuSE.

ControlTower 3.L uses Pluggable Authentication Modules (PAM) to authenticate users, giving systems administrators flexibility. ControlTower 3.L also features breakthrough security options, error handling, and logging features for greater customization and flexibility.

• Local or remote console access via serial connections to headless servers and other devices
• Remote access via TCP/IP or modem connection to the host
• Hardware certified against spurious break signals
• Up to 128 ports per host
• Complete console logs
• Secure, encrypted access to remote systems using up to 128-bit Twofish encryption
• System access can be restricted by IP address, password, or Unix account
• Many levels of filtering and access logging

The CP-SFX8 allows users to implement a centralized fabric topology in a CompactPCI chassis. Available in a 6U design, the CP-SFX8 features eight links to a PICMG 2.17 compliant backplane and supports up to eight node cards within the chassis. The card also has two front panel links to connect to a second chassis for fully redundant, fault tolerance. The card's internal switch devices interconnect so data travels no more than two hops for low latency. The CP-SFX8 card provides a per port bandwidth of 5 Gbps and an aggregate bandwidth of 40 Gbps.

• Fits in a 6U CompactPCI 2.17 compliant fabric slot
• Offers eight links to the backplane with a switching bandwidth of 5 Gbps per and 40 Gbps aggregated
• Provides two front panel links to connect to external chassis for fully redundant, fault tolerance
• Compatible Microsoft Windows and Linux operating systems

• Now compiled for Solaris 7 through 9 in 32-bit and 64-bit mode
• Mod 8 and 128 support
• Variable line speed
• Streams fully supported and documented
• Compatible with all of our multiport synchronous serial controllers
• Comprehensive, easy-to-use installation and implementation guide

The PCI-SB interface card installs in any standard PCI slot including the XP-SB series of PCI expansion chassis. The PCI 2.2 compliant interface card connects to any StarFabric-enabled device via shielded CAT5 cables with RJ-45 connectors. The interface card and any StarFabric-enabled device can be placed up to 10 meters apart. The PCI-SB is compatible with 64-bit/66 MHz and 32-bit/33 MHz bus speeds. Featuring two 2.5 Gbps, full duplex StarFabric serial links, the PCI-SB translates PCI traffic into serial frame format for transmission across the switch fabric or directly to a remote StarFabric-enabled device.

• Incorporates StarGen's StarFabric-to-PCI bridge
• PCI Rev. 2.2 compliant interface
• Two 2.5 Gbps, full-duplex StarFabric serial links
• Eight LVDS status LEDs for serial links
• Serial ROM
• DIP switches for operational modes
• Shielded CAT5 cabling via RJ-45 (for up to 10 meters)
• Linux, Microsoft Windows, Solaris (SPARC and x86), and VxWorks operating system support

The HBA is equipped with Storage Array Management Logic under driver control. With a simple API interface, this Host Bus Adapter offers powerful Storage Switch Network and Enclosure Control capabilities. For custom versions and with special requirements please contact our engineering support team.

• Built upon Intel GD31244
• PCI-X to Serial ATA Controller
• Serial Flash ROM for PCI Option ROM
  • Presents Serial ATA Hard Drives as a BOOT Capable Drives
• PCI-X Bus and Four Independent SATA channels working in Legacy Master/Slave and Native DPA Mode
• Support for Command Queuing
• Unique physical form factor for low profile enclosures
• Interoperability with VSC7175 Port Multiplexer/Port Aggregator
• Powerful enclosure control and monitoring interface
• Theoretical transfer rate up to 600MB/sec
• Windows 2000 and Linux Drivers with Software RAID support

The PMC-SB is PICMG 2.17 compliant and mounts on a CompactPCI or VME64 PMC carrier to provide a StarFabric interface. The PMC-SB converts a conventional parallel 32- or 64-bit PCI bus operating at up to 66 MHz to dual high-speed serial links compliant with the StarFabric protocol. The two links may be used separately for redundant fabric applications or may be aggregated for higher speed operation.

• Incorporates StarGen's StarFabric-to-PCI bridge
• 32-bit/33 MHz, 64-bit/66 MHz PCI interface
• Dual StarFabric links
• External RJ-45 connections (shielded CAT5 cabling for up to 10 meters) or PICMG 2.17 compatible Pn4 interconnect
• 400 Mbyte/sec sustained throughput
• Transparent protocol allows PCI-based O/S and application software to run without modification
• Fabric autoconfiguration at boot
• Redundant links for high availability
• "Root" and "Leaf" mode operation
• Compatible with Linux, Microsoft Windows, Solaris (SPARC and x86) and VxWorks operating systems

The Saturn Multiport supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 8 and 10; and Linux 2.4 kernel.

Four ports from one PCI Bus slot

• PCI 2.1 compliant
• Each port is assignable for synchronous or asynchronous communications
• Synchronous data transfer rates up to 256 kbps and asynchronous data transfer rates up to 230.4 kbps, full duplex, simultaneously on all ports
• Supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux (kernel build 2.4.17 and above)
• Interface options include:
  • RS-232
  • RS-422/485 with DB-25 connectors via an external breakout box
• Compatible with Sun synchronous communications protocols
• Optional Aurora synchronous communications protocol software for Sun Solaris include X.25 and HDLC LAPB.

The Saturn 4522P PCI serial communications controller offers data transfer rates up to 256 kbps synchronous and 230.4 kbps asynchronous, full duplex. Interface options include RS-232 and RS-422/485 with DB-25 connectors via an external breakout box. Optional synchronous data communications protocols including X.25 and HDLC are available for SPARC systems. Solstice (SunLink) protocols are fully supported.

The Saturn 4522P supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.8 and 10; and Linux kernal 2.4.

• Four ports from one PCI Bus slot
• PCI 2.2 compliant
• Each port is assignable for synchronous or asynchronous communications
• Synchronous data transfer rates up to 256 kbps and asynchronous data transfer rates up to 230.4 kbps, full duplex, simultaneously on all ports
• Supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux
• Interface options include:
  • RS-232
  • RS-422/485 with DB-25 connectors via an external breakout box
• Compatible with Sun synchronous communications protocols
• Optional synchronous communications protocol software for Sun Solaris include X.25 and HDLC LAPB.

The Saturn Multiport supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux 2.4 kernel.

• Eight ports from one PCI Bus slot
• PCI 2.1 compliant
• Each port is assignable for synchronous or asynchronous communications
• Synchronous data transfer rates up to 256 kbps and asynchronous data transfer rates up to 230.4 kbps, full duplex, simultaneously on all ports
• Supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux (kernel build 2.4.17 and above)
• Interface options include:
  • RS-232
  • RS-422/485 with DB-25 connectors via an external breakout box
• Compatible with Sun synchronous communications protocols
• Optional Aurora synchronous communications protocol software for Sun Solaris include X.25 and HDLC LAPB.

The Saturn 8522P PCI serial communications controller offers data transfer rates up to 256 kbps synchronous and 230.4 kbps asynchronous, full duplex. Interface options include RS-232 and RS-422/485 with DB-25 connectors via an external breakout box. Optional synchronous data communications protocols including X.25 and HDLC are available for SPARC systems. Solstice (SunLink) protocols are fully supported.

The Saturn 8522P supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 8 and 10; and Linux.

• Eight ports from one PCI Bus slot
• PCI 2.2 compliant
• Each port is assignable for synchronous or asynchronous communications
• Synchronous data transfer rates up to 256 kbps and asynchronous data transfer rates up to 230.4 kbps, full duplex, simultaneously on all ports
• Supports SPARC Solaris, Rev. 8, 9, and 10; Solaris x86, Rev. 2.6, 7, and 8; and Linux
• Interface options include:
  • RS-232
  • RS-422/485 with DB-25 connectors via an external breakout box
• Compatible with Sun synchronous communications protocols
• Optional synchronous communications protocol software for Sun Solaris include X.25 and HDLC LAPB.

• SysStat monitors and reports all critical functions in a chassis, including:
  • Supply voltages
  • Power supply status
  • Over/under temperature conditions
  • Fan failure
  • User defined inputs
• Flexible design supports many applications
• Standard models support ATX, CompactPCI, PCI/ISA, VME, and VME64X
• An RS-232 and I2C serial interface provides for status reporting
• Available with audio and visual indicators